Stainless steel Bimini top Cruiser (Length 220 cm / Width 180-210 cm)

€555,37

~~€952,07~~ €555,37

Sale Sold out

Taxes included. Shipping calculated at checkout.

Description

Bimini top/sunshade/boat parasol 4-arch length 220 cm made of 25mm stainless steel! Bimini top is new but the box is damaged. Tubes may have some light scratches.

Bimini top equipped with a 25mm stainless steel frame and UV resistant dope dyed polyester fabric of 320 g/m2. This series features four arches for good strength. Comes standard with 1 set of straps and 1 set of support poles so the bimini top can be securely tightened while sailing. The set also includes an integrated storage cover (see photos) and stainless steel mounting hardware.

Dimensions: Length 220 cm / Width sizes from 180 to 210 cm Height 135 cm.

Package contents:

Bimini top frame 25 mm
Fabric
Storage cover with zipper
1 x set of straps
1x set of support poles
Stainless steel mounting hardware + stainless steel screws
Installation manual

Top

Specifications

TUBES	Ø25mm stainless steel tubes. (Not high gloss)
FRAME:	Can be disassembled
FITTINGS & SCREWS	Plastic or 316 stainless steel fittings and 316 stainless steel screws.
FABRIC:	Atlas 310 g/m2 waterproof and UV resistant, meets the DIN EN ISO 9001: 2008 standard. Available in 5 colors.
STANDARD ACCESSORIES:	Integrated storage cover with zipper in the color of the bimini top, straps, stainless steel mounting hardware..
AVERAGE WEIGHT:	15 kg
CRUISING SPEED:	Max 45 km/h - 24 Knots
LENGTH:	220 cm
WIDTH:	180- 210 cm

Measuring

The only thing you need to do before ordering the bimini top is to choose the length, height, and width that best fit the size of your boat.

The length (B) and height (C) determine how much shade your bimini top will provide.

Determine where the bimini top will be attached and the range of the top when unfolded. Also check where the top will be in the lowered position at the back of the boat (dimension D) (You can find this measurement under the Specifications section). Make sure there is enough space at the front and back of the bimini top to mount the attachment eyes on the boat, where the bimini top's straps will be secured.

Using a tape measure, you can determine which length of the bimini top provides the desired amount of shade on your boat.

The main mounting point (A) is approximately in the middle of the bimini top on both sides of the boat. The flat straight deck plates supplied with the top are designed for mounting on flat surfaces. Optional brackets are available for railing mounting and side plates for side mounting.

After you have determined where the mounting of the bimini top will be on the boat, measure the distance between these mounting points to determine the width (A) of the top you need.
The frame is adjustable in width so that it can be mounted within the specified range as indicated in the sizing when you order the bimini top. (see image above) Example for a width size of 150-170 cm: This means the bimini top can be mounted at a width of 150 to 170 cm.
Choose the width that most closely matches your measurement of the width between the mounting points.

You determine the correct height while standing in the boat. If you are installing the bimini top on a small boat, do not go too high; if you can just stand, that is already good. The higher you go, the less shade you get. Especially on small rubber boats or fishing boats, you usually sit and there is no room to move your seat if it comes into the sun. If you can stand slightly bent under the bimini top on such boats, that is actually good enough.

Installation

Delivery time

Available immediately

Right of withdrawal

This product is a special offer and cannot be returned. Of course, full factory warranty applies.

Import costs

ATTENTION!! Only if you do not live in an EU member state, so outside Europe, additional costs may be charged for importing this product to your country. You can easily calculate these costs via this link using the HS code 6306.12

VAT is not calculated in our webshop if you live in a country that is not a member of the EU. VAT will only be deducted at checkout.