1 5

Stainless steel bimini top L163 cm x W240-255 cm (2 bows)

Stainless steel bimini top L163 cm x W240-255 cm (2 bows)

€999,00
€1.395,00 €999,00
Sale Sold out
Taxes included. Shipping calculated at checkout.
View full details
Description

Bimini top / sunshade / boat parasol with 3 bows, length 163 cm, made of stainless steel!

Bimini made of 25 mm stainless steel with stainless steel connecting pieces. Made of Sunbrella Silver 5035 luxury acrylic fabric, including a storage cover with zipper and 1 set of tie-down straps. The mounting method varies by boat and must be ordered separately!

DELIVERY TIME Available from stock

Specifications
TUBES: Ø25 mm marine-polished 316L stainless steel tubes
FRAME: Can be dismantled
BOWS: 3
CONNECTING PIECES AND SCREWS: 316 stainless steel
FABRIC SUNBRELLA PLUS fabric, 100% solution-dyed outdoor acrylic fabric with impermeability that complies with ISO 7211-1 standards (water-repellent, waterproof, with one side coated with acrylic resins).
Two-way zipper in the center of the fabric at the rear for the backstay
STANDARD ACCESSORIES: Storage cover with zipper and 1 set of tie-down straps
HEIGHT: +/-145 cm
LENGTH: 163 cm
Size D: 170 cm
Size A:  240 - 255 cm

 

Measuring

Before ordering the bimini top, all you need to do is choose the length, height, and width of the bimini top that best suit the size of your boat.

 The length (B) and height (C) determine how much shade your bimini top will provide.

Determine where the bimini top will be mounted and what its coverage will be when unfolded. Also check where the top will be positioned when lowered at the rear of the boat (size D) (you will find this measurement under Specifications). Make sure there is enough space at the front and rear of the bimini top to install the mounting eyes on the boat, to which the bimini top's tie-down straps will be attached.

Using a tape measure, you can determine which bimini-top length will provide the desired amount of shade on your boat.

The main mounting point (A) is located approximately in the middle of the bimini top on both sides of the boat. The flat, straight deck plates supplied with the top are designed for mounting on flat surfaces. Optional brackets are available for railing mounting, as well as side plates for side mounting.

After determining where the bimini top will be mounted on the boat, measure the distance between these mounting points to determine the width (A) of the top you need.
The frame is width-adjustable, so it can be mounted within the specified range shown in the dimensions when ordering the bimini top. (See the image above.) Example for a width of 150-170 cm: This means that the bimini top can be mounted at a width of 150 to 170 cm.
Choose the width that most closely matches your measurement of the distance between the mounting points.

Determine the correct height while standing in the boat. If you are mounting the bimini top on a small boat, do not mount it too high; if you can just stand upright, that is sufficient. The higher you mount it, the less shade it provides. Especially in small inflatable boats or fishing boats, you usually sit down, and there is no room to move your seat if it ends up in the sun. If you can stand somewhat hunched beneath the bimini top on such boats, that is generally sufficient.
Delivery time

Available from stock.

Exchanges & Returns

 

 

Featured collection

View all